PartsTable
Technical Data Sheet
Download PDF

14-513-10 — SOCKET,PLUG-IN ELECTRONIC COMPON

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14-513-10: SOCKET,PLUG-IN ELECTRONIC COMPON.

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: COPPER ALLOY AND COPPER ALLOY CONTACT, body_style: TOP MOUNT, overall_width: 0.400 INCHES NOMINAL IN, overall_height: 0.290 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, terminal_length: 0.090 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-197-1196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-513-10
NSN: 5340-01-197-1196
NIINs: 011971196, 013935382
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY AND COPPER ALLOY CONTACT
body_styleTOP MOUNT
overall_width0.400 INCHES NOMINAL IN
overall_height0.290 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
terminal_length0.090 INCHES NOMINAL IN
special_featuresSEE ASME Y14.100 FOR DRWG INTERPRETATION STANDARDS
precious_materialGOLD
surface_treatmentGOLD CONTACT
loop_inside_diameter3.120 INCHES NOMINAL IN
end_item_identificationMRAP - M-ATV
accommodated_contact_quantity14
NSN5340-01-197-1196
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14-513-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 3.440 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 45152-13T4410 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.250 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 3.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES3.440 INCHES NOMINAL IN
SPECIAL FEATURESSEE ASME Y14.100 FOR DRWG INTERPRETATION STANDARDS
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,MUFFLER
TEST DATA DOCUMENT45152-13T4410 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
END ITEM IDENTIFICATIONMRAP - M-ATV
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.250 INCHES NOMINAL IN
LOOP INSIDE DIAMETER3.120 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
UD300AYDReference document
Same NSN cross-reference
Reference document — Secondary reference
UD300AYDWReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 14-513-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-513-10?
14-513-10 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace 14-513-10?
There are 2 known substitutes for 14-513-10: UD300AYD, UD300AYDW. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-513-10?
14-513-10 is cataloged in the U.S. Government catalog under NSN 5340-01-197-1196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-513-10