PartsTable
Technical Data Sheet
Download PDF

14-42510-1 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

14-42510-1: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.100 INCHES NOMINAL IN, diameter: 0.8723 INCHES MINIMUM AND 0.8732 INCHES MAXIMUM IN, material: STEEL COMP 4130 OVERALL, head_style: FLAT, chamfer_length: 0.040 INCHES NOMINAL IN, shear_strength: 260000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-165-2170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-42510-1
NSN: 5315-00-165-2170
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
height0.100 INCHES NOMINAL IN
diameter0.8723 INCHES MINIMUM AND 0.8732 INCHES MAXIMUM IN
materialSTEEL COMP 4130 OVERALL
head_styleFLAT
chamfer_length0.040 INCHES NOMINAL IN
shear_strength260000 SINGLE POUNDS PER SQUARE INCH
surface_finish125.0 MICROINCHES OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter1.100 INCHES NOMINAL IN
under_head_length2.740 INCHES NOMINAL IN
first_hole_diameter0.141 INCHES NOMINAL IN
NSN5315-00-165-2170
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 14-42510-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
CHAMFER LENGTH: 0.040 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.740 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 1.100 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
CHAMFER LENGTH0.040 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.740 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.141 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.100 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 4130 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.8723 INCHES MINIMUM AND 0.8732 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14-42510-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-42510-1?
14-42510-1 is a PIN,STRAIGHT,HEADED.
What is the NSN for 14-42510-1?
14-42510-1 is cataloged in the U.S. Government catalog under NSN 5315-00-165-2170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-42510-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.