14-41649-1 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

14-41649-1: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.251 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, material: STEEL COMP 4130 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN, shear_strength: 180000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-009-7834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

14-41649-1

NSN: 5315-01-009-7834
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

height	0.125 INCHES NOMINAL IN
diameter	0.251 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
material	STEEL COMP 4130 OVERALL
head_style	FLAT CHAMFER
chamfer_length	0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
shear_strength	180000 SINGLE POUNDS PER SQUARE INCH
special_features	WITH 0.120 IN. DIA,0.120 IN. DEEPHOLE IN TOP OF HEAD FOR NYLON CAP IN
style_designator	STRAIGHT
pin_chamfer_angle	45.0 DEGREES NOMINAL
pin_head_diameter	0.355 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
under_head_length	0.525 INCHES NOMINAL IN
material_document_and_classification	MIL-S-6758,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5315-01-009-7834

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN

•

UNDER HEAD LENGTH: 0.525 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.355 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.251 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN

•

HEAD STYLE: FLAT CHAMFER

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
UNDER HEAD LENGTH	0.525 INCHES NOMINAL IN
PIN CHAMFER ANGLE	45.0 DEGREES NOMINAL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.355 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.251 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
HEAD STYLE	FLAT CHAMFER
HEIGHT	0.125 INCHES NOMINAL IN
SPECIAL FEATURES	WITH 0.120 IN. DIA,0.120 IN. DEEPHOLE IN TOP OF HEAD FOR NYLON CAP IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

14-41649-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 14-41649-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 14-41649-1?

14-41649-1 is a PIN,STRAIGHT,HEADED.

What parts can replace 14-41649-1?

There is 1 known substitute for 14-41649-1: 14-41649-3. Substitute compatibility should be verified for your specific system.

What is the NSN for 14-41649-1?

14-41649-1 is cataloged in the U.S. Government catalog under NSN 5315-01-009-7834. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

14-41649-1 — PIN,STRAIGHT,HEADED

Request a Quote — 14-41649-1