PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14-29040
14-29040 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

PUMPING UNIT,CONDENSATE,HEATING-. Key specifications include material: COPPER ALLOY, special_features: STEEL,AISI-4140; ROCKWELL C SCALE HARDNESS 27-34, end_item_identification: FLO-TORK VALVES 0.500 TO 1.000 IN. IN, valve_size_for_which_designed: 0.500 INCHES AND 1.000 INCHES IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-516-0824, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-29040
NSN: 3120-00-516-0824
FSC: 3120
CAGE: 79500 — WESTINGHOUSE ELECTRIC CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY
special_featuresSTEEL,AISI-4140; ROCKWELL C SCALE HARDNESS 27-34
end_item_identificationFLO-TORK VALVES 0.500 TO 1.000 IN. IN
valve_size_for_which_designed0.500 INCHES AND 1.000 INCHES IN
NSN3120-00-516-0824
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 14-29040 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 1.2515 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.1250 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM IN
•
CORNER SHAPE: SQUARE OUTSIDE RIGHT CORNER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-16541 GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BODY OUTSIDE DIAMETER1.2515 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
OVERALL LENGTH2.0625 INCHES NOMINAL IN
FLANGE WIDTH0.1250 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM IN
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-16541 GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
MATERIALCOPPER ALLOY 922 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
14-29040 ITEM 2Interchangeable
interchangeable cross-reference
interchangeable
23335Interchangeable
interchangeable cross-reference
interchangeable
14-29040Interchangeable
interchangeable cross-reference
interchangeable
14-29040 ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
27192Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14-29040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-29040?
14-29040 is a PUMPING UNIT,CONDENSATE,HEATING-.
What parts can replace 14-29040?
There are 5 known substitutes for 14-29040: 14-29040 ITEM 2, 23335, 14-29040 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-29040?
14-29040 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-516-0824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-29040

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026