PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14-25001-00
14-25001-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include diameter: 0.285 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, material: COPPER ALLOY, thickness: 0.015 INCHES NOMINAL IN, fsc_application_data: WINDSHIELD WIPER,AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-180-4627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-25001-00
NSN: 5340-00-180-4627
FSC: 5340
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
diameter0.285 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
materialCOPPER ALLOY
thickness0.015 INCHES NOMINAL IN
fsc_application_dataWINDSHIELD WIPER,AIRCRAFT
NSN5340-00-180-4627
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14-25001-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: WINDSHIELD WIPER,AIRCRAFT
•
THICKNESS: 0.015 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
•
DIAMETER: 0.285 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATAWINDSHIELD WIPER,AIRCRAFT
THICKNESS0.015 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
DIAMETER0.285 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A-25001Interchangeable
interchangeable cross-reference
interchangeable
A-25001-MDL FH1/2-166Interchangeable
interchangeable cross-reference
interchangeable
405N2V02Interchangeable
interchangeable cross-reference
interchangeable
5975Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14-25001-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-25001-00?
14-25001-00 is a DISK,SOLID,PLAIN.
What parts can replace 14-25001-00?
There are 4 known substitutes for 14-25001-00: A-25001, A-25001-MDL FH1/2-166, 405N2V02 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-25001-00?
14-25001-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-180-4627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-25001-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026