PartsTable
Technical Data Sheet
Download PDF

14-24031-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

14-24031-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL UNS K23080 OVERALL, shank_length: 1.298 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.430 INCHES NOMINAL IN, overall_length: 3.150 INCHES NOMINAL IN, shank_diameter: 0.4974 INCHES MINIMUM AND 0.4989 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-162-4060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-24031-1
NSN: 5315-00-162-4060
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL UNS K23080 OVERALL
shank_length1.298 INCHES NOMINAL IN
thread_class3A A
thread_length0.430 INCHES NOMINAL IN
overall_length3.150 INCHES NOMINAL IN
shank_diameter0.4974 INCHES MINIMUM AND 0.4989 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES UNTHREADED END
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter1.000 INCHES NOMINAL IN
NSN5315-00-162-4060
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 14-24031-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4974 INCHES MINIMUM AND 0.4989 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.5984 INCHES MINIMUM AND 0.5994 INCHES MAXIMUM IN
•
SURFACE FINISH: 63.0 MICROINCHES UNTHREADED END
•
FIRST END TAPER LENGTH: 0.050 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
SECOND END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.430 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4974 INCHES MINIMUM AND 0.4989 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.5984 INCHES MINIMUM AND 0.5994 INCHES MAXIMUM IN
SURFACE FINISH63.0 MICROINCHES UNTHREADED END
FIRST END TAPER LENGTH0.050 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
SECOND END TAPER ANGLE15.0 DEGREES NOMINAL
THREAD LENGTH0.430 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.298 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 14-24031-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-24031-1?
14-24031-1 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 14-24031-1?
14-24031-1 is cataloged in the U.S. Government catalog under NSN 5315-00-162-4060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-24031-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.