Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Surprise! Open the box and find out which lil outrageous littles are hidden inside.<br>Easily peel off the separate sections of the sticker cards and sprinkle the glitter of your on each area. <br>Wow! You will be amazed by the sparkling result. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-029-0022, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→14-197
NSN:5340-00-029-0022 FSC:5340 CAGE:83120 — PRESSED METALS OF AMERICA INC (USA)
SPECIFICATIONS
diameter
0.062 INCHES NOMINAL IN
material
STEEL COMP 410 OR STEEL COMP 420 OVERALL
head_style
COUNTERSUNK W/ REVERSE CHAMFER
design_type
SOLID
head_height
0.062 INCHES NOMINAL IN
shank_style
TUBULAR
end_diameter
0.6100 INCHES NOMINAL IN
bore_diameter
0.0900 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
overall_width
0.500 INCHES MAXIMUM IN
overall_height
0.1730 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN
overall_length
0.810 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
shank_diameter
0.188 INCHES NOMINAL IN
NSN
5340-00-029-0022
COMPONENT DIAGRAM
KEY FEATURES
•
BORE DIAMETER: 0.0900 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
•
END DIAMETER: 0.6100 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.1250 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM IN
•
DESIGN TYPE: SOLID
•
SURFACE TREATMENT: ZINC
•
STYLE DESIGNATOR: SEAT
•
MATERIAL: STEEL
•
FIRST STEP DIAMETER: 0.7800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER
0.0900 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
END DIAMETER
0.6100 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP
0.1250 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM IN
DESIGN TYPE
SOLID
SURFACE TREATMENT
ZINC
STYLE DESIGNATOR
SEAT
MATERIAL
STEEL
FIRST STEP DIAMETER
0.7800 INCHES NOMINAL IN
OVERALL HEIGHT
0.1730 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-197?
14-197 is a HINGE,HOOD,VEHICULAR manufactured by Melissa & Doug. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14-197?
There are 26 known substitutes for 14-197: 109451-3-6, BM17019-3-6Y, VS3038-3-6 and 23 more. Substitute compatibility should be verified for your specific system.
Is 14-197 still available?
14-197 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.