PartsTable
Technical Data Sheet
14-116 ✓ Verified by PartsTable
ASUS · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

P5GV-MX with Intel 915GV chipset inside is an all-in-one solution for LGA 775 Intel Pentium 4 CPU. It provides 800 MHz FSB, PCI Express architecture, Serial ATA interface, high performance integrated graphics engine, dual-channel DDR memory, 6-channel HD Audio CODEC and 10/100 LAN. It especially supports Intel EM64T and EIST technology, which provides you a 64-bit environment and an energy saving solution.

P5GV-MX is the most rewarding 775 solution in 2005 with Intel 915GV chipset inside This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1969, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
14-116
NSN: 3110-00-198-1969
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.100 INCHES NOMINAL IN
cone_width0.7710 INCHES NOMINAL IN
body_height2.250 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
bore_diameter1.1900 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
first_end_styleSQUARE
mounting_methodTHREADED HOLE(S) SINGLE GROUP
frequency_rating4.0 KILOHERTZ NOMINAL SINGLE COMPONENT
special_featuresSHAFT STOPPED ALARM PANEL
style_designatorNORMAL ANGLE
NSN3110-00-198-1969
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 14-116 · ASUS ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
STYLE DESIGNATOR: NORMAL ANGLE
MATERIAL: STEEL OVERALL
CONE WIDTH: 0.7710 INCHES NOMINAL IN
BORE DIAMETER: 1.1900 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE WIDTH0.7710 INCHES NOMINAL IN
BORE DIAMETER1.1900 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
7008465Interchangeable
interchangeable cross-reference
interchangeable
C81-2-22Interchangeable
interchangeable cross-reference
interchangeable
23089Interchangeable
interchangeable cross-reference
interchangeable
14116Interchangeable
interchangeable cross-reference
interchangeable
5322Interchangeable
interchangeable cross-reference
interchangeable
6347FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-116?
14-116 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by ASUS.
What parts can replace 14-116?
There are 18 known substitutes for 14-116: 7008465, C81-2-22, 23089 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-116?
14-116 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-116