PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13AF10B1084APC29
13AF10B1084APC29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.875 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.719 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-7034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13AF10B1084APC29
NSN: 5330-00-178-7034
FSC: 5330
CAGE: 82796 — COLTEC INDUSTRIES INC. DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.875 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.719 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-178-7034
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13AF10B1084APC29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 1.719 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.719 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
888Interchangeable
interchangeable cross-reference
interchangeable
88-8ISSUEBInterchangeable
interchangeable cross-reference
interchangeable
SS-C-00255Interchangeable
interchangeable cross-reference
interchangeable
88815Interchangeable
interchangeable cross-reference
interchangeable
C60940Interchangeable
interchangeable cross-reference
interchangeable
458-0646-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13AF10B1084APC29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13AF10B1084APC29?
13AF10B1084APC29 is a SEAL,PLAIN ENCASED.
What parts can replace 13AF10B1084APC29?
There are 27 known substitutes for 13AF10B1084APC29: 888, 88-8ISSUEB, SS-C-00255 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13AF10B1084APC29?
13AF10B1084APC29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-7034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13AF10B1084APC29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026