PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1394988
1394988 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.846 INCHES NOMINAL IN, second_leg_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-1922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1394988
NSN: 5340-00-040-1922
FSC: 5340
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length0.846 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.565 INCHES NOMINAL IN
surface_treatmentCADMIUM
first_leg_thickness0.065 INCHES NOMINAL IN
first_leg_slot_width0.360 INCHES NOMINAL IN
NSN5340-00-040-1922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1394988 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
SECOND LEG STYLE: SQUARE
•
SECOND LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG HOLE DIAMETER: 0.183 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
FIRST LEG SLOT WIDTH: 0.360 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.565 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG STYLE: CORNER RADIUS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
SECOND LEG STYLESQUARE
SECOND LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG HOLE DIAMETER0.183 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
FIRST LEG SLOT WIDTH0.360 INCHES NOMINAL IN
SECOND LEG LENGTH0.565 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG STYLECORNER RADIUS
FIRST LEG THICKNESS0.065 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
119627Interchangeable
interchangeable cross-reference
interchangeable
32752Interchangeable
interchangeable cross-reference
interchangeable
211449Interchangeable
interchangeable cross-reference
interchangeable
35568Interchangeable
ix4-300d 4TB
interchangeable
FR12183Interchangeable
interchangeable cross-reference
interchangeable
BC4487Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1394988?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1394988?
1394988 is a BRACKET,ANGLE.
What parts can replace 1394988?
There are 16 known substitutes for 1394988: 119627, 32752, 211449 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1394988?
1394988 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-1922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1394988

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026