PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1390-0215
1390-0215 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: CLAW ENGAGING, hole_diameter: 0.136 INCHES NOMINAL IN, overall_width: 0.570 INCHES NOMINAL IN, overall_height: 0.410 INCHES NOMINAL IN, overall_length: 2.100 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-093-6761, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1390-0215
NSN: 5340-00-093-6761
FSC: 5340
CAGE: 28480 — HEWLETT-PACKARD COMPANY DBA HP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeCLAW ENGAGING
hole_diameter0.136 INCHES NOMINAL IN
hole_quantity2
overall_width0.570 INCHES NOMINAL IN
overall_height0.410 INCHES NOMINAL IN
overall_length2.100 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
surface_treatmentCHROMIUM OVERALL
engaging_surface_width0.520 INCHES NOMINAL IN
NSN5340-00-093-6761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1390-0215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.136 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
ENGAGING SURFACE WIDTH: 0.520 INCHES NOMINAL IN
•
DESIGN TYPE: CLAW ENGAGING
•
OPERATION METHOD: LEVER
•
STYLE DESIGNATOR: LEVER
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.136 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCHROMIUM OVERALL
ENGAGING SURFACE WIDTH0.520 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
OPERATION METHODLEVER
STYLE DESIGNATORLEVER
OVERALL LENGTH2.100 INCHES NOMINAL IN
HOLE QUANTITY2
OVERALL HEIGHT0.410 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
1670Upgraded Successor
successor cross-reference
successor
ND29861-001Upgraded Successor
successor cross-reference
successor
210-012-0001Upgraded Successor
successor cross-reference
successor
C0LT INDUSTRIES, #1670Upgraded Successor
successor cross-reference
successor
4980273Interchangeable
interchangeable cross-reference
interchangeable
B69737Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1390-0215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1390-0215?
1390-0215 is a CATCH,CLAMPING.
What parts can replace 1390-0215?
There are 12 known substitutes for 1390-0215: 1670, ND29861-001, 210-012-0001 and 9 more. Substitute compatibility should be verified for your specific system.
Is 1390-0215 still available?
1390-0215 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1390-0215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026