PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1390-0037
1390-0037 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.406 INCHES NOMINAL IN, height: 0.406 INCHES NOMINAL IN, length: 0.813 INCHES NOMINAL IN, diameter: 0.266 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: STRAIGHT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-229-1227, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1390-0037
NSN: 5340-00-229-1227
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.406 INCHES NOMINAL IN
height0.406 INCHES NOMINAL IN
length0.813 INCHES NOMINAL IN
diameter0.266 INCHES NOMINAL IN
materialSTEEL OVERALL
pawl_typeSTRAIGHT
knob_length0.375 INCHES NOMINAL IN
pawl_swing_angle90.0 DEGREES NOMINAL
style_designatorKNURLED
surface_treatmentCADMIUM OVERALL
operational_directionRIGHT-HAND
pawl_length_from_actuating_shaft_center_to_pawl_end0.391 INCHES NOMINAL IN
NSN5340-00-229-1227
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1390-0037 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STYLE DESIGNATOR: KNURLED
•
PAWL TYPE: STRAIGHT
•
LENGTH: 0.813 INCHES NOMINAL IN
•
HEIGHT: 0.406 INCHES NOMINAL IN
•
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END: 0.391 INCHES NOMINAL IN
•
PAWL SWING ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
OPERATIONAL DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORKNURLED
PAWL TYPESTRAIGHT
LENGTH0.813 INCHES NOMINAL IN
HEIGHT0.406 INCHES NOMINAL IN
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END0.391 INCHES NOMINAL IN
PAWL SWING ANGLE90.0 DEGREES NOMINAL
KNOB LENGTH0.375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A29956Interchangeable
interchangeable cross-reference
interchangeable
12068Interchangeable
interchangeable cross-reference
interchangeable
1342809C1Interchangeable
interchangeable cross-reference
interchangeable
R12068Interchangeable
interchangeable cross-reference
interchangeable
1200-0048Interchangeable
interchangeable cross-reference
interchangeable
5203010001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1390-0037?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1390-0037?
1390-0037 is a FASTENER,PAWL.
What parts can replace 1390-0037?
There are 6 known substitutes for 1390-0037: A29956, 12068, 1342809C1 and 3 more. Substitute compatibility should be verified for your specific system.
Is 1390-0037 still available?
1390-0037 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1390-0037

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026