PartsTable
Technical Data Sheet
138640 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, special_features: WRAP AROUND LIP FOR SECURING TO FLANGE; COLOR YELLOW, inside_diameter_length: 0.750 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 5.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-280-6340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
138640
NSN: 5340-01-280-6340
FSC: 5340
CAGE: 59501 — UNISON INDUSTRIES LLC (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
special_featuresWRAP AROUND LIP FOR SECURING TO FLANGE; COLOR YELLOW
inside_diameter_length0.750 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed5.250 INCHES NOMINAL IN
NSN5340-01-280-6340
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 138640 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 5.250 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH: 0.750 INCHES NOMINAL IN
MATERIAL: PLASTIC VINYL
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED5.250 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.750 INCHES NOMINAL IN
MATERIALPLASTIC VINYL
SPECIAL FEATURESWRAP AROUND LIP FOR SECURING TO FLANGE; COLOR YELLOW
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MC4701Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 7Interchangeable
interchangeable cross-reference
interchangeable
SM-B-157211Interchangeable
interchangeable cross-reference
interchangeable
52512Interchangeable
interchangeable cross-reference
interchangeable
00372-0446Interchangeable
interchangeable cross-reference
interchangeable
23318Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 138640?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 138640?
138640 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 138640?
There are 7 known substitutes for 138640: MC4701, B94.19 TABLE 7, SM-B-157211 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 138640?
138640 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-280-6340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 138640