PartsTable
Technical Data Sheet
13854 ✓ Verified by PartsTable
schleich · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

In their first few weeks, foals have a special, very fluffy coat. It’s always very exciting when they change coats for the first time, because the colour can become lighter or darker. It can also change again over the course of time.

There are 17 recognised coat colours, including such unusual ones as grullo, cremello and perlino. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1853, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
13854
NSN: 3110-00-156-1853
FSC: 3110
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
colorWHITE
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
flow_angle90.0 DEGREES
leg_length1.734 INCHES MINIMUM AND 1.781 INCHES MAXIMUM SECOND END IN
body_height0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
design_formSET
fold_length8.500 INCHES NOMINAL IN
alignment_typeRIGID
inclosure_typeFULLY INCLOSED
overall_height14.0 MILLIMETERS NOMINAL MM
NSN3110-00-156-1853
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13854 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL OUTSIDE DIAMETER: 35.0 MILLIMETERS NOMINAL MM
BORE SMALLEST DIAMETER: 15.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATOR: GROOVED RACE SURFACE
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL OUTSIDE DIAMETER35.0 MILLIMETERS NOMINAL MM
BORE SMALLEST DIAMETER15.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OVERALL HEIGHT14.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
26038Interchangeable
interchangeable cross-reference
interchangeable
57307R2Interchangeable
interchangeable cross-reference
interchangeable
N18-03Interchangeable
interchangeable cross-reference
interchangeable
AS4842Interchangeable
interchangeable cross-reference
interchangeable
3-4CDDInterchangeable
interchangeable cross-reference
interchangeable
AS4854Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13854?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13854?
13854 is a LATCH PEDAL,FRONT AXLE manufactured by schleich.
What parts can replace 13854?
There are 33 known substitutes for 13854: 26038, 57307R2, N18-03 and 30 more. Substitute compatibility should be verified for your specific system.
Is 13854 still available?
13854 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13854