PartsTable
Technical Data Sheet
Download PDF

13853 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
schleich · ORING SEAL
PRODUCT OVERVIEW

13853: MICROCIRCUIT,DIGITAL.

Quarter horses are extremely fast. Quarter horses are extremely fast. Especially over short distances, they can reach breathtaking speeds.

They proved this in quarter-mile races in the 18th century, frequently outracing even English Thoroughbreds. Quarter horses were named after these races. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-474-1726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13853
NSN: 5340-00-474-1726
NIINs: 004741726, 007810063, 011592491, 012118207, 013878715, 016419311, 017048217
FSC: 5340 — Hardware, Commercial
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
overall_height0.812 INCHES NOMINAL IN
voltage_rating120.0 VOLTS NOMINAL
special_featuresDESCRIPTION:INCANDESCENT, LAMP, COMPACT FLOOD; 2175 LUMENS, 30 DEG BEAM ANGLE
style_designatorPARALLEL
end_hole_diameter0.228 INCHES NOMINAL IN
features_providedPROGRAMMED
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC
NSN5340-00-474-1726
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13853 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
BODY OUTSIDE DIAMETER: 0.525 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PARALLEL
•
BODY INSIDE DIAMETER: 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
•
END HOLE DIAMETER: 0.228 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.812 INCHES NOMINAL IN
MATERIAL HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
BODY OUTSIDE DIAMETER0.525 INCHES MINIMUM AND 0.528 INCHES MAXIMUM IN
STYLE DESIGNATORPARALLEL
BODY INSIDE DIAMETER0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING
END HOLE DIAMETER0.228 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
Manufacturer release date (catalog record)2018-01-01
No demilitarization required
Ready to buy 13853?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13853?
13853 is a MICROCIRCUIT,DIGITAL manufactured by schleich.
What is the NSN for 13853?
13853 is cataloged in the U.S. Government catalog under NSN 5340-00-474-1726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13853

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.