PartsTable
Technical Data Sheet
Download PDF

1384C7002 — ROD END,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1384C7002: ROD END,THREADED.

The ROD END,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, thread_class: 2A OVERALL A, thread_length: 1.250 INCHES NOMINAL ROD CONNECTION IN, overall_length: 13.438 INCHES MINIMUM AND 13.562 INCHES MAXIMUM IN, special_features: ADDITONAL THREADED HOLE 1/8 NPTF; CENTER PERPENDICULAR THREADED HOLE 1-8 UNC, thread_direction: RIGHT-HAND OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-315-0538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1384C7002
NSN: 5340-01-315-0538
FSC: 5340 — Hardware, Commercial
CAGE: 61811 — GENERAL CRANE AND HOIST, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OVERALL
thread_class2A OVERALL A
thread_length1.250 INCHES NOMINAL ROD CONNECTION IN
overall_length13.438 INCHES MINIMUM AND 13.562 INCHES MAXIMUM IN
special_featuresADDITONAL THREADED HOLE 1/8 NPTF; CENTER PERPENDICULAR THREADED HOLE 1-8 UNC
thread_directionRIGHT-HAND OVERALL
nominal_thread_size0.265 INCHES ROD CONNECTION IN
unthreaded_end_length12.250 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
unthreaded_end_outside_diameter6.438 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-315-0538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1384C7002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNTHREADED END OUTSIDE DIAMETER: 6.438 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.250 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
UNTHREADED END LENGTH: 12.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND OVERALL
•
NOMINAL THREAD SIZE: 0.265 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
UNTHREADED END OUTSIDE DIAMETER6.438 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
THREAD LENGTH1.250 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH13.438 INCHES MINIMUM AND 13.562 INCHES MAXIMUM IN
UNTHREADED END LENGTH12.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND OVERALL
NOMINAL THREAD SIZE0.265 INCHES ROD CONNECTION IN
SPECIAL FEATURESADDITONAL THREADED HOLE 1/8 NPTF; CENTER PERPENDICULAR THREADED HOLE 1-8 UNC
THREAD CLASS2A OVERALL A
MATERIALSTEEL COMP 4140 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 1384C7002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1384C7002?
1384C7002 is a ROD END,THREADED.
What is the NSN for 1384C7002?
1384C7002 is cataloged in the U.S. Government catalog under NSN 5340-01-315-0538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1384C7002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.