The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, first_end_style: CHAMFERED, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 1.156 INCHES NOMINAL IN, pin_overall_diameter: 0.1554 INCHES MINIMUM AND 0.1558 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-8325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 1020 OVERALL |
| first_end_style | CHAMFERED |
| hardness_rating | 58.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM OVERALL |
| pin_overall_length | 1.156 INCHES NOMINAL IN |
| pin_overall_diameter | 0.1554 INCHES MINIMUM AND 0.1558 INCHES MAXIMUM IN |
| first_end_taper_angle | 45.0 DEGREES NOMINAL |
| first_end_taper_length | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| material_document_and_classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| second_end_relationship_with_first_end | IDENTICAL |
| NSN | 5305-00-013-8325 |
| HEAD STYLE | FLAT CHAMFER |
| NOMINAL THREAD DIAMETER | 0.562 INCHES IN |
| FASTENER LENGTH | 1.490 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN |
| INTERNAL DRIVE STYLE | HEXAGON |
| HEAD DIAMETER | 0.801 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| HEAD HEIGHT | 0.554 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| WIDTH ACROSS FLATS | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN |
| THREAD QUANTITY PER INCH | 12 |
| MATERIAL | STEEL OVERALL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |