PartsTable
Technical Data Sheet
Download PDF

1382M66P05 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1382M66P05: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, block_height: 0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN, overall_width: 0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN, overall_length: 2.230 INCHES MINIMUM AND 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM2.270 INCHES MAXIMUM IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-288-9915, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1382M66P05
NSN: 5340-01-288-9915
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
block_height0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN
overall_width0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
overall_length2.230 INCHES MINIMUM AND 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM2.270 INCHES MAXIMUM IN
special_featuresDESIGNED FOR A TOTAL COMPRESSION GAP OF 0.050 IN.; TOP SIDE BEVELLED 14.5 DEG MIN 15.5 DEG MAX TO INTERSECTION OF 1.010 IN. RADIUS W/TOP SURF IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter1.750 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity1
mounting_hole_diameter0.213 INCHES MINIMUM AND 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM0.224 INCHES MAXIMUM IN
mounting_hole_quantity11
cable_diameter_for_which_designed1.700 INCHES NOMINAL ALL HOLES IN
NSN5340-01-288-9915
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1382M66P05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 11
•
CLAMPING HOLE QUANTITY: 1
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 1.130 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5645 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5646 ASSN STD 2ND MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.213 INCHES MINIMUM AND 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM0.224 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY11
CLAMPING HOLE QUANTITY1
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER1.130 INCHES NOMINAL IN
BLOCK HEIGHT0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5645 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5646 ASSN STD 2ND MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.213 INCHES MINIMUM AND 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM0.224 INCHES MAXIMUM IN
OVERALL LENGTH2.230 INCHES MINIMUM AND 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM2.270 INCHES MAXIMUM IN
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
CLAMPING HOLE DIAMETER1.750 INCHES NOMINAL ALL HOLES IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1382M66P05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1382M66P05?
1382M66P05 is a CLAMP,BLOCK,SECTION.
What is the NSN for 1382M66P05?
1382M66P05 is cataloged in the U.S. Government catalog under NSN 5340-01-288-9915. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1382M66P05

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.