PartsTable
Technical Data Sheet
Download PDF

138294 — PIN,SPRING

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

138294: PIN,SPRING.

- Optimum protection for the Apple iPhone 6/6s from dirt and scratches as the smartphone can be used in the folding case - Insert compartments for safe storage of cards or the like - Quick access to the iPhone, the device does not have to be removed from the case - Openings for full access to connections - Trendy military style with a camouflage pattern - Without fastener This part is cataloged in the U.S. Government catalog under NSN 5305-00-273-4691, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
138294
NSN: 5305-00-273-4691
NIINs: 002734691, 008234333, 009838083
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length1.786 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
fastener_length1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-273-4691
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 138294 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
•
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.000 INCHES NOMINAL IN
•
THREAD LENGTH: 2.000 INCHES MINIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES BEARING SURFACE OF HEAD
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
HEAD HEIGHT0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH2.000 INCHES NOMINAL IN
THREAD LENGTH2.000 INCHES MINIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
MS35455-106Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 138294?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 138294?
138294 is a PIN,SPRING manufactured by Hama.
What parts can replace 138294?
There is 1 known substitute for 138294: MS35455-106. Substitute compatibility should be verified for your specific system.
What is the NSN for 138294?
138294 is cataloged in the U.S. Government catalog under NSN 5305-00-273-4691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 138294