PartsTable
Technical Data Sheet
Download PDF

138292 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

138292: SCREW,CAP,SOCKET HEAD.

- Optimum protection for the Apple iPhone 6/6s from dirt and scratches as the smartphone can be used in the folding case - Insert compartments for safe storage of cards or the like - Quick access to the iPhone, the device does not have to be removed from the case - Openings for full access to connections - Cheerful striped pattern - Without fastener This part is cataloged in the U.S. Government catalog under NSN 5305-00-273-4689, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
138292
NSN: 5305-00-273-4689
NIINs: 002734689, 009837462
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length1.500 INCHES MINIMUM IN
surface_finish125.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length1.500 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-273-4689
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 138292 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
•
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES BEARING SURFACE OF HEAD
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
HEAD HEIGHT0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES MINIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
MS35455-104Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 138292?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 138292?
138292 is a SCREW,CAP,SOCKET HEAD manufactured by Hama.
What parts can replace 138292?
There is 1 known substitute for 138292: MS35455-104. Substitute compatibility should be verified for your specific system.
What is the NSN for 138292?
138292 is cataloged in the U.S. Government catalog under NSN 5305-00-273-4689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 138292

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.