PartsTable
Technical Data Sheet
Download PDF

1382292 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1382292: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, thread_class: 2A A, thread_length: 0.234 INCHES NOMINAL IN, overall_length: 1.4060 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-118-0635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1382292
NSN: 5315-00-118-0635
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
thread_class2A A
thread_length0.234 INCHES NOMINAL IN
overall_length1.4060 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
first_end_styleSQUARE
special_featuresROOVED FROM FIRST STEP END TO HEAD END,3; FIRST,SECOND AND THIRD UNDERCUT WIDTH 0.031 IN. W,0.175 IN. DIAMETER IN
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_step_length0.062 INCHES NOMINAL IN
surface_treatmentCHROMATE OVERALL
third_step_length0.296 INCHES NOMINAL IN
NSN5315-00-118-0635
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1382292 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST STEP DIAMETER: 0.3750 INCHES NOMINAL IN
•
FIRST END LOCATION: UNTHREADED END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THIRD STEP DIAMETER: 0.175 INCHES NOMINAL IN
•
THREAD LENGTH: 0.234 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST STEP DIAMETER0.3750 INCHES NOMINAL IN
FIRST END LOCATIONUNTHREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THIRD STEP DIAMETER0.175 INCHES NOMINAL IN
THREAD LENGTH0.234 INCHES NOMINAL IN
FIRST END STYLESQUARE
SECOND STEP LENGTH0.078 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 1382292?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1382292?
1382292 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 1382292?
1382292 is cataloged in the U.S. Government catalog under NSN 5315-00-118-0635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1382292