PartsTable
Technical Data Sheet
Download PDF

13810 — KEY SET,SOCKET HEAD SCREW

✓ Government record, cited
schleich · NUT WASHER
PRODUCT OVERVIEW

13810: KEY SET,SOCKET HEAD SCREW.

Clydesdales are among the biggest horses in the world. When they are fully grown, their height is 160-180 cm. The only horses that are bigger are Shire Horses and Brabanters.

Clydesdales grow more slowly than other horse breeds. The foals aren't fully grown until the age of seven or eight, instead of four or five. They then weigh over 1,000 kg - as much as a small car.

They are so strong that they can pull objects that are much heavier than themselves. This also means they need a lot of food and water. Every day, they need 20-25 kg of grain with minerals and vitamins, and around 50-60 kg hay.

Needless to say, this makes them thirsty - very thirsty, in fact. Clydesdales drink over 100 litres of water per day. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-0702, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
13810
NSN: 5310-00-167-0702
NIINs: 001670702, 002405300, 007375195, 010123695, 016283950
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating50.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter2.125 INCHES NOMINAL IN
aperture_diameter0.188 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classification7992 FSCM 53553 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-167-0702
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13810 · schleich ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY 268 OR COPPER ALLOY 11 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER ALLOY 268 OR COPPER ALLOY 11 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
804228Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFW92TYPEAGRADE2CLASSEReference document
Same NSN cross-reference
Reference document — Identification reference
5310001670702Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN960B416Reference document
Same NSN cross-reference
Reference document — Secondary reference
LS12906-46Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN960B416LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
Manufacturer release date (catalog record)2016-01-01
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 13810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13810?
13810 is a KEY SET,SOCKET HEAD SCREW manufactured by schleich.
What parts can replace 13810?
There are 6 known substitutes for 13810: 804228, FFW92TYPEAGRADE2CLASSE, 5310001670702 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13810?
13810 is cataloged in the U.S. Government catalog under NSN 5310-00-167-0702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13810