PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 138086
138086 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include end_item_identification: ST53, part_name_assigned_by_controlling_agency: HOSE STRAP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-013-8086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
138086
NSN: 5315-00-013-8086
FSC: 5315
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
end_item_identificationST53
part_name_assigned_by_controlling_agencyHOSE STRAP
NSN5315-00-013-8086
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 138086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP B1111 OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.422 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.219 INCHES NOMINAL IN
•
DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
HEAD STYLEFLAT
MATERIALSTEEL COMP 1010 OR STEEL COMP B1111 OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HEIGHT0.156 INCHES NOMINAL IN
UNDER HEAD LENGTH1.422 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.219 INCHES NOMINAL IN
DIAMETER0.500 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.1406 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
138086Interchangeable
interchangeable cross-reference
interchangeable
114787Interchangeable
interchangeable cross-reference
interchangeable
16619R1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 138086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 138086?
138086 is a PIN,STRAIGHT,HEADED.
What parts can replace 138086?
There are 3 known substitutes for 138086: 138086, 114787, 16619R1. Substitute compatibility should be verified for your specific system.
What is the NSN for 138086?
138086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-013-8086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 138086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026