PartsTable
Technical Data Sheet
Download PDF

1380-1329 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1380-1329: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.5625 INCHES NOMINAL IN, cone_width: 0.7940 INCHES NOMINAL IN, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 0.7625 INCHES NOMINAL IN, standout_width: 0.2000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1380-1329
NSN: 3110-00-100-4444
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: F0704 — THE TIMKEN COMPANY (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.5625 INCHES NOMINAL IN
cone_width0.7940 INCHES NOMINAL IN
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.7625 INCHES NOMINAL IN
standout_width0.2000 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter2.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4444
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1380-1329 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.1250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2000 INCHES NOMINAL IN
•
CONE WIDTH: 0.7940 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.5625 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.7625 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.1250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.2000 INCHES NOMINAL IN
CONE WIDTH0.7940 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER0.8750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
RFSX1590CReference document
Same NSN cross-reference
Reference document — Secondary reference
303400Reference document
Same NSN cross-reference
Reference document — Secondary reference
K1380K1329Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A232101Reference document
Same NSN cross-reference
Reference document — Secondary reference
W13ABP005REV7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
324A610Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1380-1329?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1380-1329?
1380-1329 is a BEARING,ROLLER,TAPERED.
What parts can replace 1380-1329?
There are 7 known substitutes for 1380-1329: RFSX1590C, 303400, K1380K1329 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1380-1329?
1380-1329 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1380-1329

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.