PartsTable
Technical Data Sheet
Download PDF

137619327 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

137619327: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, special_features: WEDGE TYPE CUSHION CONSTRUCTION, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-286-9414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
137619327
NSN: 5340-00-286-9414
FSC: 5340 — Hardware, Commercial
CAGE: A0199 — LEONARDO S.P.A. - ELECTRONICS DIVISION - DEFENCE BUSINESS AREA (ITA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
special_featuresWEDGE TYPE CUSHION CONSTRUCTION
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
loop_inside_diameter1.735 INCHES MINIMUM AND 1.760 INCHES MAXIMUM IN
departure_from_cited_designatorAS MODIFIED BY SPECIAL FEATURES
cushioning_environmental_protectionFUEL, AROMATIC
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.516 INCHES NOMINAL IN
NSN5340-00-286-9414
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 137619327 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.516 INCHES NOMINAL IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SPECIAL FEATURES
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.516 INCHES NOMINAL IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY SPECIAL FEATURES
SPECIAL FEATURESWEDGE TYPE CUSHION CONSTRUCTION
TONGUE HOLE TYPEROUND, UNTHREADED
SUBSTITUTES & CROSS-REFERENCES 6
MIL-C-8603Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-8603Reference document
Same NSN cross-reference
Reference document — Identification reference
MS21919DG28Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS21919WDF28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340PL2168012Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS21919-28Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 137619327?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 137619327?
137619327 is a CLAMP,LOOP.
What parts can replace 137619327?
There are 6 known substitutes for 137619327: MIL-C-8603, MIL-DTL-8603, MS21919DG28 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 137619327?
137619327 is cataloged in the U.S. Government catalog under NSN 5340-00-286-9414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 137619327

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.