PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1376-19-333
1376-19-333 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: WEDGE TYPE CUSHION CONSTRUCTION, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-7451, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1376-19-333
NSN: 5340-00-200-7451
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresWEDGE TYPE CUSHION CONSTRUCTION
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
loop_inside_diameter1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
end_item_identificationRG-31 MRAP &RCV
nondefinitive_spec/std_data4 TYPE AND A CLASS
departure_from_cited_designatorAS DIFFERENTIATED BY SPECIAL FEATURES
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
NSN5340-00-200-7451
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1376-19-333 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: RUBBER CUSHION
•
DEPARTURE FROM CITED DESIGNATOR: AS DIFFERENTIATED BY SPECIAL FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.204 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
DEPARTURE FROM CITED DESIGNATORAS DIFFERENTIATED BY SPECIAL FEATURES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALRUBBER CUSHION
OVERALL WIDTH0.500 INCHES NOMINAL IN
SPECIAL FEATURESWEDGE TYPE CUSHION CONSTRUCTION
LOOP INSIDE DIAMETER1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.928 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
10335339Upgraded Successor
successor cross-reference
successor
AS21919WCG03Upgraded Successor
successor cross-reference
successor
AS21919Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1376-19-333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1376-19-333?
1376-19-333 is a CLAMP,LOOP.
What parts can replace 1376-19-333?
There are 20 known substitutes for 1376-19-333: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 17 more. Substitute compatibility should be verified for your specific system.
Is 1376-19-333 still available?
1376-19-333 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1376-19-333

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026