PartsTable
Technical Data Sheet
Download PDF

1373M93P01 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1373M93P01: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: ALUMINUM ALLOY 6061 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, overall_length: 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM IN, style_designator: DOUBLE ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-287-9633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1373M93P01
NSN: 5340-01-287-9633
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialALUMINUM ALLOY 6061 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
overall_length2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM IN
style_designatorDOUBLE ARCH
surface_treatmentANODIZE
material_thickness0.642 INCHES NOMINAL IN
mounting_hole_size0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
inside_diameter/arch_length0.788 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
inside_diameter/large_arch_length1.038 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
NSN5340-01-287-9633
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1373M93P01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: DOUBLE ARCH
•
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH: 0.503 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.642 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LARGE ARCH AND MOUNTING HOLE: 0.739 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORDOUBLE ARCH
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH0.503 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
OVERALL LENGTH2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM IN
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIAL THICKNESS0.642 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LARGE ARCH AND MOUNTING HOLE0.739 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1373M93P01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1373M93P01?
1373M93P01 is a STRAP,RETAINING.
What is the NSN for 1373M93P01?
1373M93P01 is cataloged in the U.S. Government catalog under NSN 5340-01-287-9633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1373M93P01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.