1370J33 — SHAFT ASSEMBLY,SHOULDERED

✓ Government record, cited

— · GATE VALVE

PRODUCT OVERVIEW

1370J33: SHAFT ASSEMBLY,SHOULDERED.

The SHAFT ASSEMBLY,SHOULDERED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 BODY, bonnet_type: INSIDE SCREW, connection_type: THREADED EXTERNAL PIPE ALL ENDS, connection_style: PLAIN (PIPE) ALL ENDS, special_features: BAR HANDLE, style_designator: STRAIGHT THRU. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-451-5051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1370J33

NSN: 4820-01-451-5051
FSC: 4820 — Valves, Nonpowered
CAGE: 60089 — TECO-WESTINGHOUSE MOTOR COMPANY (USA)

SPECIFICATIONS

material	STEEL COMP 316 BODY
bonnet_type	INSIDE SCREW
connection_type	THREADED EXTERNAL PIPE ALL ENDS
connection_style	PLAIN (PIPE) ALL ENDS
special_features	BAR HANDLE
style_designator	STRAIGHT THRU
thread_direction	RIGHT-HAND ALL ENDS
operating_pressure	6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_device	STEM
nominal_thread_size	0.500 INCHES ALL ENDS IN
maximum_operating_temp	450.0 FAHRENHEIT SINGLE RESPONSE DEGF
valve_operation_method	MANUAL
NSN	4820-01-451-5051

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW CONTROL DEVICE: STEM

•

CONNECTION STYLE: PLAIN (PIPE) ALL ENDS

•

CONNECTION TYPE: THREADED EXTERNAL PIPE ALL ENDS

•

STYLE DESIGNATOR: STRAIGHT THRU

•

OPERATING PRESSURE: 6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS

•

BONNET TYPE: INSIDE SCREW

•

THREAD DIRECTION: RIGHT-HAND ALL ENDS

•

NOMINAL THREAD SIZE: 0.500 INCHES ALL ENDS IN

TECHNICAL CHARACTERISTICS

FLOW CONTROL DEVICE	STEM
CONNECTION STYLE	PLAIN (PIPE) ALL ENDS
CONNECTION TYPE	THREADED EXTERNAL PIPE ALL ENDS
STYLE DESIGNATOR	STRAIGHT THRU
OPERATING PRESSURE	6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
BONNET TYPE	INSIDE SCREW
THREAD DIRECTION	RIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE	0.500 INCHES ALL ENDS IN
MAXIMUM OPERATING TEMP	450.0 FAHRENHEIT SINGLE RESPONSE DEGF
SPECIAL FEATURES	BAR HANDLE

SUBSTITUTES & CROSS-REFERENCES 6

2732J03Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

1370J33 PIECE 004Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SS-26VS8Reference document

Same NSN cross-reference

Reference document — Secondary reference

1370J30Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

1370J30 PIECE 017Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2732J03 PIECE 017Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1370J33?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1370J33?

1370J33 is a SHAFT ASSEMBLY,SHOULDERED.

What parts can replace 1370J33?

There are 6 known substitutes for 1370J33: 2732J03, 1370J33 PIECE 004, SS-26VS8 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1370J33?

1370J33 is cataloged in the U.S. Government catalog under NSN 4820-01-451-5051. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1370J33 — SHAFT ASSEMBLY,SHOULDERED

Request a Quote — 1370J33