PartsTable
Technical Data Sheet
Download PDF

137087-1 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

137087-1: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN, screw_material: STEEL COMP 303, fastener_length: 0.250 INCHES NOMINAL IN, special_features: 0.190 INCH DIA HOLE ALONG THE LONGITUDINAL CENTERLINE IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-269-9224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
137087-1
NSN: 5305-01-269-9224
FSC: 5305 — Screws
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length0.250 INCHES NOMINAL IN
special_features0.190 INCH DIA HOLE ALONG THE LONGITUDINAL CENTERLINE IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleRECESSED TYPE I
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch28
NSN5305-01-269-9224
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 137087-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.250 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303
SPECIAL FEATURES0.190 INCH DIA HOLE ALONG THE LONGITUDINAL CENTERLINE IN
INTERNAL DRIVE STYLERECESSED TYPE I
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
D791639-8AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 137087-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 137087-1?
137087-1 is a SCREW,MACHINE.
What parts can replace 137087-1?
There is 1 known substitute for 137087-1: D791639-8A. Substitute compatibility should be verified for your specific system.
What is the NSN for 137087-1?
137087-1 is cataloged in the U.S. Government catalog under NSN 5305-01-269-9224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 137087-1