PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 137-012-9015
137-012-9015 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, overall_width: 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, overall_outside_diameter: 0.9997 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-455-4097, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
137-012-9015
NSN: 3110-00-455-4097
FSC: 3110
CAGE: 5XMS1 — JTEKT BEARINGS NORTH AMERICA LLC DIV KBNA - ORD 1 (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
overall_width0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
overall_outside_diameter0.9997 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN
NSN3110-00-455-4097
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 137-012-9015 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.9997 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN
•
MATERIAL: STEEL RETAINER
•
BORE DIAMETER: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.9997 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN
MATERIALSTEEL RETAINER
OVERALL WIDTH0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
BORE DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
J1-26Interchangeable
interchangeable cross-reference
interchangeable
20300-8Interchangeable
interchangeable cross-reference
interchangeable
SCE126Interchangeable
Same NIIN cross-reference
interchangeable
5901-103C25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 137-012-9015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 137-012-9015?
137-012-9015 is a BEARING,ROLLER,NEEDLE.
What parts can replace 137-012-9015?
There are 4 known substitutes for 137-012-9015: J1-26, 20300-8, SCE126 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 137-012-9015?
137-012-9015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-455-4097. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 137-012-9015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026