PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 137-012-9004
137-012-9004 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.4270 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OPEN END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-404-0810, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
137-012-9004
NSN: 3110-00-404-0810
FSC: 3110
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.4270 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOPEN END
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
overall_outside_diameter0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-404-0810
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 137-012-9004 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4270 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
BORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
SPECIAL FEATURESOPEN END
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
TS83SRInterchangeable
interchangeable cross-reference
interchangeable
24-3Interchangeable
interchangeable cross-reference
interchangeable
J47Interchangeable
interchangeable cross-reference
interchangeable
8323D1Interchangeable
interchangeable cross-reference
interchangeable
3HD1Interchangeable
interchangeable cross-reference
interchangeable
257700Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 137-012-9004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 137-012-9004?
137-012-9004 is a BEARING,ROLLER,NEEDLE.
What parts can replace 137-012-9004?
There are 9 known substitutes for 137-012-9004: TS83SR, 24-3, J47 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 137-012-9004?
137-012-9004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-404-0810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 137-012-9004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026