PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13685L AND 1360
13685L AND 1360 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL CUP, cone_width: 0.7500 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN, retainer_fabrication_method: PRESSED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-051-1016, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13685L AND 1360
NSN: 3110-01-051-1016
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CUP
cone_width0.7500 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-051-1016
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13685L AND 1360 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: RUBBER SEAL
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
CONE WIDTH: 0.7500 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNORMAL ANGLE
MATERIALRUBBER SEAL
MATERIALSTEEL CUP
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
BORE DIAMETER1.5000 INCHES NOMINAL IN
CONE WIDTH0.7500 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
13600L13685LInterchangeable
interchangeable cross-reference
interchangeable
13600LA902A3Interchangeable
interchangeable cross-reference
interchangeable
13685LInterchangeable
interchangeable cross-reference
interchangeable
79848RHInterchangeable
interchangeable cross-reference
interchangeable
79848LInterchangeable
interchangeable cross-reference
interchangeable
6271E42-ITEM19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13685L AND 1360?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13685L AND 1360?
13685L AND 1360 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 13685L AND 1360?
There are 11 known substitutes for 13685L AND 1360: 13600L13685L, 13600LA902A3, 13685L and 8 more. Substitute compatibility should be verified for your specific system.
Is 13685L AND 1360 still available?
13685L AND 1360 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13685L AND 1360

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026