PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1366AS546-1
1366AS546-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL BODY, fork_depth: 1.000 INCHES NOMINAL IN, hole_diameter: 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN, overall_width: 1.108 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, fork_span_width: 0.720 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-282-2232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1366AS546-1
NSN: 5340-01-282-2232
FSC: 5340
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL BODY
fork_depth1.000 INCHES NOMINAL IN
hole_diameter0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN
overall_width1.108 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
fork_span_width0.720 INCHES NOMINAL IN
fork_arm_thickness0.194 INCHES NOMINAL IN
rod_connection_bore_depth0.194 INCHES NOMINAL IN
rod_connection_bore_diameter0.470 INCHES NOMINAL IN
material_document_and_classificationAM-C1009CQ MFR REF SINGLE MATERIAL RESPONSE BODY
distance_from_pivot_pinhole_center_to_rod_connection_end1.194 INCHES NOMINAL IN
NSN5340-01-282-2232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1366AS546-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 1.194 INCHES NOMINAL IN
•
ROD CONNECTION BORE DIAMETER: 0.470 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.720 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AM-C1009CQ MFR REF SINGLE MATERIAL RESPONSE BODY
•
FORK ARM THICKNESS: 0.194 INCHES NOMINAL IN
•
ROD CONNECTION BORE DEPTH: 0.194 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.194 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER0.470 INCHES NOMINAL IN
OVERALL WIDTH1.108 INCHES NOMINAL IN
FORK SPAN WIDTH0.720 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S:AIRCRAFT, TOMCAT F-14; HELICOPTER, MH-53E; HELICOPTER,ADVANCE ATTACK,AH-1W; HELICOPTER, SEARCH AND RESCUE, HH-60H; AIRCRAFT, HAWKEYE E-2C; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, CARRIER BASED ASW, SH-60F; AIRCRAFT, C-2A (REPROCURED); AIRCRAFT, VIKING S-3B A
MATERIAL DOCUMENT AND CLASSIFICATIONAM-C1009CQ MFR REF SINGLE MATERIAL RESPONSE BODY
FORK ARM THICKNESS0.194 INCHES NOMINAL IN
ROD CONNECTION BORE DEPTH0.194 INCHES NOMINAL IN
MATERIALSTEEL BODY
HOLE DIAMETER0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
96X394AInterchangeable
interchangeable cross-reference
interchangeable
29214HInterchangeable
interchangeable cross-reference
interchangeable
4250837-4Interchangeable
interchangeable cross-reference
interchangeable
HX3Interchangeable
interchangeable cross-reference
interchangeable
M22520/10-01Interchangeable
interchangeable cross-reference
interchangeable
1855685Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1366AS546-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1366AS546-1?
1366AS546-1 is a CLEVIS,ROD END.
What parts can replace 1366AS546-1?
There are 18 known substitutes for 1366AS546-1: 96X394A, 29214H, 4250837-4 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1366AS546-1?
1366AS546-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-282-2232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1366AS546-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026