PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1366AS465
1366AS465 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, outside_diameter: 2.506 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.501 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-284-0862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1366AS465
NSN: 5330-01-284-0862
FSC: 5330
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
outside_diameter2.506 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.501 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.747 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-01-284-0862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1366AS465 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: VERTICAL
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
OUTSIDE DIAMETER: 2.506 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
SEALING ELEMENT STYLEVERTICAL
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT
MATERIALSTEEL CORROSION RESISTING SPRING
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLESQUARE
OUTSIDE DIAMETER2.506 INCHES NOMINAL IN
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.747 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
Y90902Interchangeable
interchangeable cross-reference
interchangeable
17395Interchangeable
interchangeable cross-reference
interchangeable
151-53R2N325-800-252Interchangeable
interchangeable cross-reference
interchangeable
415187-4001Interchangeable
interchangeable cross-reference
interchangeable
9433884Interchangeable
interchangeable cross-reference
interchangeable
88417395Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1366AS465?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1366AS465?
1366AS465 is a SEAL,PLAIN ENCASED.
What parts can replace 1366AS465?
There are 9 known substitutes for 1366AS465: Y90902, 17395, 151-53R2N325-800-252 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1366AS465?
1366AS465 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-284-0862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1366AS465

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026