PartsTable
Technical Data Sheet
Download PDF

136677 — PACKING,PREFORMED

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

136677: PACKING,PREFORMED.

- Antenna for AM and FM reception - Suitable for all vehicles with a 12 V electrical system - Easy to mount without drilling: is fixed to the inside of the windscreen - No more problems with car washes, theft and vandalism - Built-in amplifier and anti-interference circuit - Red shining ring, can be switched off - With a DIN 150 ohm plug This part is cataloged in the U.S. Government catalog under NSN 5330-01-020-2306, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
136677
NSN: 5330-01-020-2306
FSC: 5330 — Packing and Gasket Materials
CAGE: D2188 — ALBERT ZIEGLER GMBH DIV EXPORT DEPARTMENT (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-01-020-2306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 136677 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
0.0111.52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ORAR00111-N9038Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
O111-8309Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PRP111-8309Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1003.06.18.13.00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ORAR00111-N9083Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 136677?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 136677?
136677 is a PACKING,PREFORMED manufactured by Hama.
What parts can replace 136677?
There are 6 known substitutes for 136677: 0.0111.52, ORAR00111-N9038, O111-8309 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 136677?
136677 is cataloged in the U.S. Government catalog under NSN 5330-01-020-2306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 136677