PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13667
13667 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Sandberg USB-C Audio Adapter PD65W gives you both audio connection and charging at the same time. Easily connect your headset via USB-C and enjoy clear sound in and out while your device charges with up to 65W. Ideal for laptops, tablets, and smartphones.

No installation needed. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-780-5232, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13667
NSN: 5330-00-780-5232
FSC: 5330
CAGE: 73165 — FEDERAL-MOGUL CORP FEL-PRO GASKET DIV (USA)
SPECIFICATIONS
materialSTEEL
step_quantity3
end_similarityIDENTICAL
overall_length2.265 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES
first_end_stylePLAIN
first_end_diameter0.1250 INCHES NOMINAL IN
fsc_application_dataALTTITUDE CONTROLLER ACFT
largest_step_diameter0.250 INCHES NOMINAL IN
NSN5330-00-780-5232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13667 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 7
•
HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTWO BOLT HOLES 0.203 IN. DIA IN
OVERALL LENGTH6.180 INCHES NOMINAL IN
OVERALL WIDTH4.180 INCHES NOMINAL IN
BOLT HOLE QUANTITY7
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
33473Interchangeable
interchangeable cross-reference
interchangeable
0334730007Interchangeable
interchangeable cross-reference
interchangeable
3101-1284Interchangeable
interchangeable cross-reference
interchangeable
13667Interchangeable
interchangeable cross-reference
interchangeable
K-5121342Interchangeable
Same NIIN cross-reference
interchangeable
5330007805232Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13667?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13667?
13667 is a SHAFT,SHOULDERED manufactured by Sandberg.
What parts can replace 13667?
There are 8 known substitutes for 13667: 33473, 0334730007, 3101-1284 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13667?
13667 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-780-5232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13667

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026