136519 — SEAL ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

136519: SEAL ASSEMBLY.

The SEAL ASSEMBLY is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL, head_style: COUNTERSUNK W/ REVERSE CHAMFER, hole_depth: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, head_height: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN, shank_style: TUBULAR, hole_diameter: 0.099 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-013-6519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

136519

NSN: 5320-00-013-6519
NIINs: 000136519, 008150722
FSC: 5320 — Rivets
CAGE: 24617 — GENERAL MOTORS CORP (USA)

SPECIFICATIONS

material	COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
head_style	COUNTERSUNK W/ REVERSE CHAMFER
hole_depth	0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
head_height	0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
shank_style	TUBULAR
hole_diameter	0.099 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
shank_diameter	0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
shear_strength	36000 DOUBLE POUNDS PER SQUARE INCH
fastener_length	0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
countersink_angle	148.0 DEGREES MINIMUM AND 150.0 DEGREES MAXIMUM
surface_treatment	OXIDE OVERALL
head_major_diameter	0.289 INCHES MINIMUM AND 0.303 INCHES MAXIMUM IN
NSN	5320-00-013-6519

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HOLE DEPTH: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 FED SPEC ALL MATERIAL RESPONSES OVERALL

•

HEAD STYLE: COUNTERSUNK W/ REVERSE CHAMFER

•

SHANK STYLE: TUBULAR

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
HEAD HEIGHT	0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
FASTENER LENGTH	0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DEPTH	0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-321 FED SPEC ALL MATERIAL RESPONSES OVERALL
HEAD STYLE	COUNTERSUNK W/ REVERSE CHAMFER
SHANK STYLE	TUBULAR
SURFACE TREATMENT	OXIDE OVERALL
COUNTERSINK ANGLE	148.0 DEGREES MINIMUM AND 150.0 DEGREES MAXIMUM

SUBSTITUTES & CROSS-REFERENCES 2

FFR556Reference document

Same NSN cross-reference

Reference document — Identification reference

MS16536-92Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 136519?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 136519?

136519 is a SEAL ASSEMBLY.

What parts can replace 136519?

There are 2 known substitutes for 136519: FFR556, MS16536-92. Substitute compatibility should be verified for your specific system.

What is the NSN for 136519?

136519 is cataloged in the U.S. Government catalog under NSN 5320-00-013-6519. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

136519 — SEAL ASSEMBLY

Request a Quote — 136519