PartsTable
Technical Data Sheet
PartsTable / MRO / 13628
13628 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

This smart card reader can connect to your mobile phone, tablet, laptop, or PC regardless whether it has a traditional USB-A port, a micro USB port, or a USB-C port. Reads and writes on SD and Micro SD cards. Made of aluminium.

Handy size, optimal speed. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-269-3215, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 13628
NSN: 5305-00-269-3215
FSC: 5305
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
degasserNOT INCLUDED
governorNOT INCLUDED
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
disk_size1.000 INCHES IN
body_styleCYLINDRICAL SERVO MOUNTED
case_styleSQUARE
float_typeDOUBLE
head_styleHEXAGON
seal_width0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
body_length1.094 INCHES NOMINAL IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
shaft_styleROUND
NSN5305-00-269-3215
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 13628 · Sandberg ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
SURFACE FINISH63.0 MICROINCHES THREADS
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
13628CPInterchangeable
interchangeable cross-reference
interchangeable
13628Interchangeable
interchangeable cross-reference
interchangeable
6041300Interchangeable
interchangeable cross-reference
interchangeable
0-13628Interchangeable
interchangeable cross-reference
interchangeable
1166276Interchangeable
interchangeable cross-reference
interchangeable
11968AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13628?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13628?
13628 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 13628?
There are 21 known substitutes for 13628: 13628CP, 13628, 6041300 and 18 more. Substitute compatibility should be verified for your specific system.
Is 13628 still available?
13628 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13628

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026