PartsTable
Technical Data Sheet
PartsTable / MRO / 1361-32
1361-32 ✓ Verified by PartsTable
Blomberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 1361-32 is a Blomberg industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: CAP, nut_height: 0.375 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-187-4258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1361-32
NSN: 5310-00-187-4258
FSC: 5310
CAGE: 07239 — AVO INTL (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleCAP
nut_height0.375 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentNICKEL OVERALL
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch20
NSN5310-00-187-4258
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1361-32 · Blomberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 20
•
BEARING SURFACE TYPE: WASHER FACED
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.375 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
BEARING SURFACE TYPEWASHER FACED
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.375 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2B
NUT STYLECAP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
150PL2Interchangeable
interchangeable cross-reference
interchangeable
AN8008Interchangeable
interchangeable cross-reference
interchangeable
AN8008D5Interchangeable
interchangeable cross-reference
interchangeable
H-X9A-101Interchangeable
interchangeable cross-reference
interchangeable
10-1722Interchangeable
interchangeable cross-reference
interchangeable
10-1722-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1361-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1361-32?
1361-32 is a 1361-32 manufactured by Blomberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1361-32?
There are 9 known substitutes for 1361-32: 150PL2, AN8008, AN8008D5 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1361-32?
1361-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-187-4258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1361-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026