PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1359480
1359480 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, overall_width: 0.750 INCHES NOMINAL IN, style_designator: TWO PIECE, material_thickness: 0.190 INCHES NOMINAL IN, loop_inside_diameter: 7.000 INCHES NOMINAL IN, fastening_device_type: SELF-LOCKING HEXAGON NUT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-254-7380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1359480
NSN: 5340-01-254-7380
FSC: 5340
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
overall_width0.750 INCHES NOMINAL IN
style_designatorTWO PIECE
material_thickness0.190 INCHES NOMINAL IN
loop_inside_diameter7.000 INCHES NOMINAL IN
fastening_device_typeSELF-LOCKING HEXAGON NUT
NSN5340-01-254-7380
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1359480 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.190 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 7.000 INCHES NOMINAL IN
•
FASTENING DEVICE TYPE: SELF-LOCKING HEXAGON NUT
•
STYLE DESIGNATOR: TWO PIECE
•
MATERIAL: ALUMINUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.190 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
LOOP INSIDE DIAMETER7.000 INCHES NOMINAL IN
FASTENING DEVICE TYPESELF-LOCKING HEXAGON NUT
STYLE DESIGNATORTWO PIECE
MATERIALALUMINUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
800070Interchangeable
interchangeable cross-reference
interchangeable
6545NCM104688Interchangeable
interchangeable cross-reference
interchangeable
18335Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1359480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1359480?
1359480 is a CLAMP,LOOP.
What parts can replace 1359480?
There are 3 known substitutes for 1359480: 800070, 6545NCM104688, 18335. Substitute compatibility should be verified for your specific system.
What is the NSN for 1359480?
1359480 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-254-7380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1359480

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026