PartsTable
Technical Data Sheet
13580 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

With this smart charger kit you can charge most mobile phones and many portable devices such as MP3 players. The kit will give you full flexibility as you will be able to charge in an ordinary wall socket, in your car or on your PC. Put the wall socket charger in your desk drawer, the car charger in your glove compartment and a USB cable with the matching adapter in your bag – then you will never run out of power.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1486, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
13580
NSN: 3110-00-198-1486
FSC: 3110
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.6875 INCHES NOMINAL IN
cone_width0.9550 INCHES NOMINAL IN
bore_diameter1.1250 INCHES NOMINAL IN
overall_width0.9688 INCHES NOMINAL IN
standout_width0.2813 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, STEEP ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter2.8593 INCHES NOMINAL IN
nondefinitive_spec/std_data753 TYPE
retainer_fabrication_methodPRESSED
NSN3110-00-198-1486
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13580 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONE WIDTH: 0.9550 INCHES NOMINAL IN
CUP WIDTH: 0.6875 INCHES NOMINAL IN
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: STRAIGHT BORE, STEEP ANGLE
STANDOUT WIDTH: 0.2813 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.9688 INCHES NOMINAL IN
CONE WIDTH0.9550 INCHES NOMINAL IN
CUP WIDTH0.6875 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STANDOUT WIDTH0.2813 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
H924045H924010Interchangeable
interchangeable cross-reference
interchangeable
A-A-59651Interchangeable
interchangeable cross-reference
interchangeable
A-A-59651-080Interchangeable
interchangeable cross-reference
interchangeable
64AX37Interchangeable
interchangeable cross-reference
interchangeable
53387Interchangeable
interchangeable cross-reference
interchangeable
310470Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13580?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13580?
13580 is a BEARING,ROLLER,TAPERED manufactured by Sandberg.
What parts can replace 13580?
There are 29 known substitutes for 13580: H924045H924010, A-A-59651, A-A-59651-080 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13580?
13580 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13580