PartsTable
Technical Data Sheet
Download PDF

1356AS131 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1356AS131: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL, nut_style: SLEEVE, nut_length: 0.150 INCHES NOMINAL IN, nut_diameter: 0.399 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-151-5573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1356AS131
NSN: 5310-00-151-5573
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL
nut_styleSLEEVE
nut_length0.150 INCHES NOMINAL IN
nut_diameter0.399 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNEF
flange_thickness0.100 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.375 INCHES IN
cross-sectional_shapeHEXAGONAL FLANGE
thread_quantity_per_inch32
NSN5310-00-151-5573
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1356AS131 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
NUT LENGTH: 0.150 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 4834,FSCM 27342 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
FLANGE THICKNESS: 0.100 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
NUT LENGTH0.150 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION4834,FSCM 27342 MFR REF SINGLE TREATMENT RESPONSE OVERALL
FLANGE THICKNESS0.100 INCHES NOMINAL IN
THREAD SERIESUNEF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT DIAMETER0.399 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10022165-101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1356AS131?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1356AS131?
1356AS131 is a NUT,SLEEVE.
What parts can replace 1356AS131?
There is 1 known substitute for 1356AS131: 10022165-101. Substitute compatibility should be verified for your specific system.
What is the NSN for 1356AS131?
1356AS131 is cataloged in the U.S. Government catalog under NSN 5310-00-151-5573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1356AS131

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.