PartsTable
Technical Data Sheet
Download PDF

13566023-2 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13566023-2: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL ALL ENDS, chamfer_length: 14.365 INCHES MINIMUM AND 14.395 INCHES MAXIMUM ALL ENDS IN, special_features: FINISH: CADMIUM PLATE PER QQ-P-416, TYPE II, CLASS 2, end_item_identification: 1550012839327, DRONE, AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-467-6257, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13566023-2
NSN: 5340-01-467-6257
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
chamfer_angle45.0 DEGREES NOMINAL ALL ENDS
chamfer_length14.365 INCHES MINIMUM AND 14.395 INCHES MAXIMUM ALL ENDS IN
special_featuresFINISH: CADMIUM PLATE PER QQ-P-416, TYPE II, CLASS 2
end_item_identification1550012839327, DRONE, AIRCRAFT
NSN5340-01-467-6257
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13566023-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 14.365 INCHES MINIMUM AND 14.395 INCHES MAXIMUM ALL ENDS IN
•
CHAMFER ANGLE: 45.0 DEGREES NOMINAL ALL ENDS
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH14.365 INCHES MINIMUM AND 14.395 INCHES MAXIMUM ALL ENDS IN
SPECIAL FEATURESFINISH: CADMIUM PLATE PER QQ-P-416, TYPE II, CLASS 2
CHAMFER ANGLE45.0 DEGREES NOMINAL ALL ENDS
END ITEM IDENTIFICATION1550012839327, DRONE, AIRCRAFT
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13566023-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13566023-2?
13566023-2 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for 13566023-2?
13566023-2 is cataloged in the U.S. Government catalog under NSN 5340-01-467-6257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13566023-2