PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 135617 (C2) ITE
135617 (C2) ITE ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 135617 (C2) ITE is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-789-7495, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
135617 (C2) ITE
NSN: 5330-00-789-7495
FSC: 5330
CAGE: 96070 — JOHNSON AND BASSETT INC (USA)
SPECIFICATIONS
Part Number135617 (C2) ITE
NSN5330-00-789-7495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 135617 (C2) ITE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 0.999 INCHES MINIMUM AND 1.001 INCHES MAXIMUM IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
SEALING ELEMENT STYLE: VERTICAL
•
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER0.999 INCHES MINIMUM AND 1.001 INCHES MAXIMUM IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
SEALING ELEMENT STYLEVERTICAL
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE SEALING ELEMENT
SEAL WIDTH0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
61525Interchangeable
interchangeable cross-reference
interchangeable
A32309Interchangeable
interchangeable cross-reference
interchangeable
SP31642Interchangeable
interchangeable cross-reference
interchangeable
135754Interchangeable
interchangeable cross-reference
interchangeable
31-5171Interchangeable
interchangeable cross-reference
interchangeable
5M2411-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 135617 (C2) ITE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135617 (C2) ITE?
135617 (C2) ITE is a 135617 (C2) ITE.
What parts can replace 135617 (C2) ITE?
There are 15 known substitutes for 135617 (C2) ITE: 61525, A32309, SP31642 and 12 more. Substitute compatibility should be verified for your specific system.
Is 135617 (C2) ITE still available?
135617 (C2) ITE is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135617 (C2) ITE

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026