PartsTable
Technical Data Sheet
Download PDF

135601-1 — SLEEVE,DIRECTIONAL CONTROL LINEA

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

135601-1: SLEEVE,DIRECTIONAL CONTROL LINEA.

SLEEVE,DIRECTIONAL CONTROL LINEA. Key specifications include material: STEEL CORROSION RESISTING, overall_length: 0.528 INCHES MAXIMUM IN, special_features: 0.500 IN.OD;6 HOLES 0.093 IN.DIA EQUALLY SPACED IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-340-4770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
135601-1
NSN: 5305-00-340-4770
NIINs: 003404770, 009727814
FSC: 5305 — Screws
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_length0.528 INCHES MAXIMUM IN
special_features0.500 IN.OD;6 HOLES 0.093 IN.DIA EQUALLY SPACED IN
NSN5305-00-340-4770
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 135601-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 6.438 INCHES MINIMUM AND 6.562 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: OXIDE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH6.438 INCHES MINIMUM AND 6.562 INCHES MAXIMUM IN
THREAD LENGTH0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTOXIDE OVERALL
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
20097-3F104BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 135601-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135601-1?
135601-1 is a SLEEVE,DIRECTIONAL CONTROL LINEA.
What parts can replace 135601-1?
There is 1 known substitute for 135601-1: 20097-3F104B. Substitute compatibility should be verified for your specific system.
What is the NSN for 135601-1?
135601-1 is cataloged in the U.S. Government catalog under NSN 5305-00-340-4770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135601-1