PartsTable
Technical Data Sheet
Download PDF

13557299 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13557299: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.600 INCHES NOMINAL IN, hole_diameter: 0.129 INCHES NOMINAL IN, overall_height: 0.690 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), special_features: IF NEEDED FINISH 5.1.1 OF MIL-STD-171, style_designator: STANDOFF. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-467-7149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13557299
NSN: 5340-01-467-7149
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width0.600 INCHES NOMINAL IN
hole_diameter0.129 INCHES NOMINAL IN
hole_quantity2
overall_height0.690 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresIF NEEDED FINISH 5.1.1 OF MIL-STD-171
style_designatorSTANDOFF
end_item_identification1430014108567, MAINT SHOP, GS, DS
NSN5340-01-467-7149
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13557299 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
WIDTH: 0.600 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
HOLE DIAMETER: 0.129 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.690 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORSTANDOFF
SPECIAL FEATURESIF NEEDED FINISH 5.1.1 OF MIL-STD-171
WIDTH0.600 INCHES NOMINAL IN
END ITEM IDENTIFICATION1430014108567, MAINT SHOP, GS, DS
HOLE QUANTITY2
HOLE DIAMETER0.129 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13557299?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13557299?
13557299 is a CLIP,SPRING TENSION.
What is the NSN for 13557299?
13557299 is cataloged in the U.S. Government catalog under NSN 5340-01-467-7149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13557299