PartsTable
Technical Data Sheet
Download PDF

135508001 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

135508001: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include plate_width: 4.190 INCHES NOMINAL IN, plate_length: 4.880 INCHES NOMINAL IN, hole_diameter: 0.221 INCHES NOMINAL IN, inside_length: 4.500 INCHES NOMINAL IN, stock_diameter: 0.440 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-682-1502, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
135508001
NSN: 5340-00-682-1502
FSC: 5340 — Hardware, Commercial
CAGE: 54108 — D & J PARTS INC (USA)
SPECIFICATIONS
plate_width4.190 INCHES NOMINAL IN
plate_length4.880 INCHES NOMINAL IN
hole_diameter0.221 INCHES NOMINAL IN
inside_length4.500 INCHES NOMINAL IN
stock_diameter0.440 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance1.810 INCHES NOMINAL IN
special_features5 MOUNTING HOLES
style_designatorDELTA OPEN
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
mounting_plate_styleRAISED
distance_between_ends2.750 INCHES NOMINAL IN
NSN5340-00-682-1502
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 135508001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE LENGTH: 4.880 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
INSIDE LENGTH: 4.500 INCHES NOMINAL IN
•
MOUNTING METHOD: MOUNTING PLATE
•
PLATE WIDTH: 4.190 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DELTA OPEN
•
HANDLE CLEARANCE: 1.810 INCHES NOMINAL IN
•
STOCK DIAMETER: 0.440 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PLATE LENGTH4.880 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
INSIDE LENGTH4.500 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
PLATE WIDTH4.190 INCHES NOMINAL IN
STYLE DESIGNATORDELTA OPEN
HANDLE CLEARANCE1.810 INCHES NOMINAL IN
STOCK DIAMETER0.440 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS2.750 INCHES NOMINAL IN
SPECIAL FEATURES5 MOUNTING HOLES
SUBSTITUTES & CROSS-REFERENCES 6
TA50A15Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
NASM35791Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
1205J4Reference document
Same NSN cross-reference
Reference document — Secondary reference
67330Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1205 4 3-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35791-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 135508001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135508001?
135508001 is a HANDLE,BAIL.
What parts can replace 135508001?
There are 6 known substitutes for 135508001: TA50A15, NASM35791, 1205J4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 135508001?
135508001 is cataloged in the U.S. Government catalog under NSN 5340-00-682-1502. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135508001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.