PartsTable
Technical Data Sheet
Download PDF

1350H-SS-.500-12 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1350H-SS-.500-12: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SLEEVE, nut_length: 0.750 INCHES MAXIMUM IN, thread_class: 2A A, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-487-7122, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1350H-SS-.500-12
NSN: 5310-01-487-7122
FSC: 5310 — Nuts and Washers
CAGE: 51506 — ACCURATE SCREW MACHINE CORP DIV ACCURATE SCREW MACHINE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSLEEVE
nut_length0.750 INCHES MAXIMUM IN
thread_class2A A
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
cross-sectional_shapeHEXAGONAL LOCKING INSERT
nut_width_across_flats0.375 INCHES NOMINAL IN
end_item_identification4920-01-425-7322
thread_quantity_per_inch32
NSN5310-01-487-7122
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1350H-SS-.500-12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
NUT WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
CROSS-SECTIONAL SHAPE: HEXAGONAL LOCKING INSERT
•
NUT STYLE: SLEEVE
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
NUT LENGTH0.750 INCHES MAXIMUM IN
THREAD SERIESUNF
NUT WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
CROSS-SECTIONAL SHAPEHEXAGONAL LOCKING INSERT
NUT STYLESLEEVE
THREAD CLASS2A A
END ITEM IDENTIFICATION4920-01-425-7322
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1350H-SS-.500-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1350H-SS-.500-12?
1350H-SS-.500-12 is a NUT,SLEEVE.
What is the NSN for 1350H-SS-.500-12?
1350H-SS-.500-12 is cataloged in the U.S. Government catalog under NSN 5310-01-487-7122. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1350H-SS-.500-12