PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 135094H
135094H ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL, outside_diameter: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, special_features: DIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT, style_designator: CIRCULAR, aperture_diameter: 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN, cross-sectional_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-282-8113, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
135094H
NSN: 5330-00-282-8113
FSC: 5330
CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
materialCORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL
outside_diameter1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
special_featuresDIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT
style_designatorCIRCULAR
aperture_diameter0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-282-8113
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 135094H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: CORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SPECIAL FEATURESDIPPED IN A MIXTURE OF 100 VISCOSITY PARAFFIN OIL AND PETROLEUM SULFONATE OR EQUIVALENT
APERTURE DIAMETER0.774 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +2126-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALCORK AND RESIN SYNTHETIC OR RESIN NATURAL OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS35387-2Interchangeable
interchangeable cross-reference
interchangeable
506102Interchangeable
interchangeable cross-reference
interchangeable
40618AInterchangeable
interchangeable cross-reference
interchangeable
A1620Interchangeable
interchangeable cross-reference
interchangeable
MS15716-11Interchangeable
interchangeable cross-reference
interchangeable
17511Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 135094H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135094H?
135094H is a GASKET.
What parts can replace 135094H?
There are 18 known substitutes for 135094H: MS35387-2, 506102, 40618A and 15 more. Substitute compatibility should be verified for your specific system.
Is 135094H still available?
135094H is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135094H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026