135-13103-007 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

135-13103-007: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR, body_width: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_height: 0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN, body_length: 0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-079-5957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 135-13103-007

NSN: 5905-00-079-5957
FSC: 5905 — Resistor
CAGE: F6158 — SFIM INDUSTRIES (FRA)

SPECIFICATIONS

body_style	RECTANGULAR
body_width	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_height	0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
body_length	0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
bearing_type	SLEEVE SHAFT
shaft_length	0.030 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
cubic_measure	0.054 CUBIC INCHES
shaft_diameter	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
mounting_method	TERMINAL
terminal_length	0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
NSN	5905-00-079-5957

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 5.00 INCH-OUNCES IN

•

ELECTRICAL RESISTANCE PER SECTION: 2.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

FRAGILITY FACTOR: MODERATELY RUGGED

•

BODY STYLE: RECTANGULAR

•

TERMINAL LENGTH: 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES IN
ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FRAGILITY FACTOR	MODERATELY RUGGED
BODY STYLE	RECTANGULAR
TERMINAL LENGTH	0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
MOUNTING METHOD	TERMINAL
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

55-3-8-202Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

615144Reference document

Same NSN cross-reference

Reference document — Secondary reference

5151-7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5151-007Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 135-13103-007?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 135-13103-007?

135-13103-007 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 135-13103-007?

There are 4 known substitutes for 135-13103-007: 55-3-8-202, 615144, 5151-7 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 135-13103-007?

135-13103-007 is cataloged in the U.S. Government catalog under NSN 5905-00-079-5957. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

135-13103-007 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 135-13103-007